Knauf

Bulk Buy - 200mm Knauf Loft Roll 44 Combi-cut

1140mm x 6.00m | 6.84m² per roll

SKU: BM005979-BULK
  • internal Icon
  • Loft Icon
£28.52 Ex VAT

FREE delivery over £500 excluding VAT

When the brief is the warmest possible loft, buying 200mm Knauf Loft Roll 44 in bulk brings the cost down on what is the thickest roll in the range. Laid over a 100mm base it pushes the total to 300mm, past the 270mm standard, and a pair of 200mm layers takes it to 500mm for a 0.09 W/m²K U-value, the kind of figure you see in a well-insulated new build. Euroclass A1 non-combustible at 0.044 W/mK, it stays low-itch & easy to handle on new build & renovation work.
Available in bulk

Knauf

Bulk Buy - 200mm Knauf Loft Roll 44 Combi-cut

1140mm x 6.00m | 6.84m² per roll

SKU: BM005979-BULK
  • internal Icon
  • Loft Icon
£28.52 Ex VAT

FREE delivery over £500 excluding VAT

When the brief is the warmest possible loft, buying 200mm Knauf Loft Roll 44 in bulk brings the cost down on what is the thickest roll in the range. Laid over a 100mm base it pushes the total to 300mm, past the 270mm standard, and a pair of 200mm layers takes it to 500mm for a 0.09 W/m²K U-value, the kind of figure you see in a well-insulated new build. Euroclass A1 non-combustible at 0.044 W/mK, it stays low-itch & easy to handle on new build & renovation work.

Product Description

Buying the 200mm Knauf Loft Roll 44 Combi-cut in bulk makes sense on projects where the aim is to drive heat loss as low as it will go, as the thickest roll Knauf offer in this range. Worked over a 100mm base layer between the joists, it lifts the total depth to 300mm, comfortably past the 270mm used to meet the 0.16 W/m²K roof target under Part L of the Building Regulations. Push it further with two 200mm layers cross-laid over the base and the total reaches 500mm, dropping the U-value to roughly 0.09 W/m²K, the standard of insulation you'd expect to find specified in a new build. It's intended for cold pitched roofs at ceiling level, and is equally at home between joists in suspended timber floors.

Performance sits at 0.044 W/mK thermal conductivity with a thermal resistance of 4.50 m²K/W, the highest in the range, and as a glass mineral wool it carries a measure of acoustic absorption too, quietening airborne sound through the ceiling. Each roll is 1140mm wide by 6.00m long, giving 6.84m² of cover, and the combi-cut perforations split it to 2 x 570mm or 3 x 380mm for standard joist centres, or leave it whole for a full-width cross-laid run with little waste. The extra thickness still handles easily: light to carry up into the loft and quick to cut, well within reach of a capable DIYer as much as a trade crew.

It's made with ECOSE® Technology, Knauf's bio-based binder, so there's no added formaldehyde or phenol, it's CFC & HCFC free, and it carries zero ozone depletion potential, with up to 80% recycled glass in every roll. Rot proof, odourless & non-hygroscopic, it won't draw vermin or feed mould, fungi or bacteria, and it lasts the life of the building. A dependable choice for retrofit & new build projects where thermal performance is the priority.

Benefits

  • Buying in bulk offers better value on larger projects and helps keep material costs down
  • The thickest roll in the range, ideal for maximising loft performance and future-proofing the specification
  • Thermal resistance (R-value) of 4.50 m²K/W for the 200mm roll, the highest in the range
  • Thermal conductivity of 0.044 W/mK for reliable, effective thermal performance
  • Euroclass A1 non-combustible: the best possible fire classification, meaning the product does not burn
  • Combi-cut format, partially perforated at 2 x 570mm & 3 x 380mm to suit standard joist centres
  • Also suitable as a primary single layer between joists, or in suspended timber floors
  • Lightweight, low-itch & easy to handle on site
  • Manufactured with ECOSE® Technology, a bio-based binder with no added formaldehyde or phenol
  • Made with up to 80% recycled glass content: CFC free, HCFC free, with zero ozone depletion potential
  • Rot proof, odourless & non-hygroscopic: will not attract vermin or support mould or fungi
  • BRE Green Guide rating A+

Good to know

  • Each roll covers 6.84m²
  • 100mm base plus a 200mm cross-laid layer gives 300mm total, for a U-value of approximately 0.14 W/m²K, beyond the 270mm Part L standard
  • 100mm base plus two 200mm cross-laid layers gives 500mm total, for a U-value of approximately 0.09 W/m²K, the level typically specified in new build
  • Thickness: 200mm; width: 2 x 570mm or 3 x 380mm; length: 6.00m
  • Thermal resistance: 4.50 m²K/W; vapour resistivity: 5.00 MNs/g.m
  • Keep insulation clear of downlights & other heat-producing fixtures, using non-combustible covers where required
  • Store indoors, dry & flat; protect from prolonged sunlight & moisture
  • Always refer to the Knauf Loft Roll Installation Guide before installation

Certifications & Standards

  • Compliant with BS EN 13162:2012+A1:2015: thermal insulation products for buildings
  • Euroclass A1 reaction to fire classification: non-combustible
  • CCPI Verification Mark: certificate number 000600173/0627
  • EUCEB certified: fibres comply with the exoneration criteria for carcinogenicity (Note Q)
  • Manufactured to ISO 9001:2015+A1:2024: Quality Management Systems
  • Manufactured to ISO 14001:2015+A1:2024: Environmental Management Systems
  • Manufactured to ISO 45001:2023+A1: Occupational Health and Safety Management Systems
  • Manufactured to ISO 50001:2018: Energy Management Systems
  • BES 6001 (v4.0) 'Very Good' rating: responsible sourcing of constituent materials
  • DECLARE 'Red List Free' label: no harmful chemicals from the Red List
  • EPD available in accordance with ISO 14025:2023, ISO 21930:2017 and EN 15804+A2:2019


Always refer to the latest Knauf technical datasheet and Declaration of Performance before specification or installation.

Technical Datasheets

Product FAQs

What is the thermal conductivity of Knauf Loft Roll 44 200mm?

Knauf Loft Roll 44 200mm has a declared thermal conductivity of 0.044 W/mK and a thermal resistance (R-value) of 4.50 m²K/W.

What is the coverage of Knauf Loft Roll 44 200mm?

Each roll covers 6.84m². The roll is 6.00m long and 1.14m wide, available as 2 x 570mm or 3 x 380mm widths in combi-cut format.

What is the 200mm Knauf Loft Roll 44 used for?

It is designed as a cross-laid overlay layer, laid perpendicular to the 100mm base layer between joists. It is the preferred choice where maximum thermal performance is the priority, and is typically used in new build specifications where depths of 400–500mm are standard.

What total insulation depth does the 200mm roll achieve?

When combined with a 100mm base layer between joists, one 200mm cross-laid layer gives 300mm total depth and a U-value of 0.14–0.15 W/m²K. Two 200mm cross-laid layers gives 500mm total depth and a U-value of 0.09 W/m²K — the maximum performance specification.

Does 200mm Knauf Loft Roll 44 meet building regulations?

Yes. When used with a 100mm base layer, a single 200mm cross-laid layer achieves 300mm total depth, which exceeds the 270mm minimum required in England and Wales. For Scotland's 350mm minimum, two 200mm layers over a 100mm base gives 500mm — well above the requirement.

What fire rating does Knauf Loft Roll 44 200mm have?

It achieves a Euroclass A1 reaction to fire classification — the best possible rating, meaning the product is classified as non-combustible.

Is Knauf Loft Roll 44 200mm environmentally friendly?

Yes. It is manufactured with ECOSE® Technology using a bio-based binder with no added formaldehyde or phenol. It contains up to 80% recycled glass content, is CFC and HCFC free, and has zero ozone depletion potential.

Customer Information

Free delivery on orders over £500 ex-VAT. All orders below £500 (ex-VAT) are subject to a £50 delivery charge.

Ordering & Delivery

How do I place an order with Insulation UK?

You can place an order for delivery anytime online. If you want to collect from our distribution centre in South Yorkshire then please email us your requirements at sales@insulationuk.co.uk
and we will send a payment link and collection instructions. If you can’t see what you are looking for or need more information, then call our team on 03003 034 578 and we can sort your order from there.

How do I know what’s happening with my order and when I will receive it?

When you have placed your order, you will then receive an email confirmation, giving you an order reference number and asking you to double check everything is correct on your order such as delivery address, quantities etc. If there are any amendments to be made, then please reply to your confirmation email with any details.

Once the team has processed the order you will receive an email with a BY delivery date, this is the latest date you will receive your delivery.

Your final email will be a 24/48hr notification, on the day of the delivery if you need a more accurate ETA then contact the office on 03003 034 578. 

Do you offer next-day delivery?

Yes, we do on certain lines, you will see our next day delivery products marked as NEXT DAY. Order before 12pm for next day delivery (charges will apply)

How much does delivery cost and how long will it take?

Standard delivery is £50 + VAT for all orders below £500 excluding VAT, above £500 excluding VAT delivery is free. Bespoke deliveries can be made but will incur charges. Each product page gives you an estimate delivery by date. For more accurate information call the team on 03003 034 578

Can I choose a specific delivery date or time slot?

We will endeavour to try and accommodate a preferred date, if you need a delivery on a certain day, then please call us on 03003 034 578.

Do you deliver nationwide?

We deliver across most of the UK; however, some postcodes are restricted due to their location. Check out our delivery map for more information. If you find that you are in area we don’t deliver to, we have access to a wide range of haulage options, please call the team on 03003 034 578 to discuss your requirements further.

Will the driver help unload the insulation products?

Most of our deliveries are made with vehicles with mechanical off-load (known as a moffett or fork-lift), the driver will leave them in a safe place of your choice. They will help as much as they are allowed but are not insured to bring anything into a property.

What happens if my order arrives damaged or incomplete?

In the unlikely event your order arrives damaged, then please contact within 48 hours at sales@insulationuk.co.uk with any images of the damage and the team will be in touch. If there is anything missing, then notify the team within 48 hours on 03003 034 578

What if my order doesn’t arrive and I have paid for trades to be on site, can I claim anything towards the costs I have incurred?

We advise not to have trades booked in and around the day of your delivery. Things can happen beyond our control, and your delivery may be delayed or abandoned. We cannot be held liable for any consequential loss such as tradesman wages etc.

 

Product Advice & Support

How do I know which insulation product is right for my project?

With such a variety of insulation products, we fully understand making sure you have the right one can seem daunting. Our team have over 50 years of experience in the construction industry and there isn’t a question they haven’t been asked! Speak to our technical team on 03003 034 578 and they will be happy to offer some help and guidance.

Do you offer technical advice or support before I buy?

Yes we do! Just call 03003 034 578 and ask for our technical team and we will be happy to support you.

Product Information & Suitability

Product descriptions on this website are provided as general guidance only and are not a substitute for the manufacturer’s Technical Data Sheet (TDS), fire classification information, and the project’s design/specification requirements. Suitability depends on the full build-up and intended use (including any requirement for encapsulation, coverings, and compliance with Building Regulations and the project fire strategy).

It is the customer’s responsibility to confirm, before ordering, that the product specification and performance are suitable for the intended application by reviewing the relevant TDS and taking professional advice where required. If you are unsure, contact us before purchase and provide your intended build-up so we can confirm what information we can support.

Nothing in this notice limits or excludes your statutory rights

Can I speak to someone to confirm product specifications?

Of course you can! There is also a range of data sheets and guides available on the product pages under Technical Information.

Are your products suitable for both DIY and trade customers?

Yes, they are. If you are new to DIY projects involving insulation,
then we advise to always do your research. We have a handy guides section which may help.

Do you offer fire-rated or eco-friendly insulation options?

Yes, we do. Fire ratings are indicated in the specification table on the product page, and our sustainable range is continually growing.

Pricing & Payments

Do you offer trade or bulk-buy discounts?

We always aim to offer the best price online; however we do offer project pricing for larger orders, speak to our sales team with your requirements on 03003 034 578.

What payment methods do you accept?

We accept all major cards including American Express, as well as Apple Pay, Google Pay and PayPal

Can I set up a trade account with credit terms?

We do offer trade accounts, however there are certain criteria we ask for, and any credit account application is subject to credit checks. Call the team on 03003 034 578 to discuss any credit applications.

Do your prices include VAT?

The website has a toggle at the top right of the page so the prices can be displayed including and excluding VAT. VAT, where applicable, is charged at checkout.

Returns & Cancellations

Can I return unwanted insulation products?

Contact the team via email sales@insulationuk.co.uk  with the items you wish to return and any other information. Please note if we you need us to collect any unwanted items,
a collection fee will apply.

How do I arrange a return or exchange?

Contact the team via email sales@insulationuk.co.uk or check out our refund policy.

Are there any restocking fees?

Restocking charges will apply in certain instances, please contact the team via email at sales@insulationuk.co.uk check out our refund policy.

What if I’ve ordered incorrectly or need to cancel my order?

Contact the team via email as soon as possible. The best way to get in contact is to reply to any of the emails we have sent you, they will come straight through to the team and will have any relevant order information already on there.

  

Installation & Compliance

Do you offer installation services or just supply materials?

We do not offer any installation services; we are a supplier of insulation and building materials.

Can I get a datasheet or certificate of performance for your products?

Yes, data sheets can be found in the Technical Information drop down on the product page.

How should I store insulation products before installation?

There are a variety of insulation products each with their own storage instructions. Generally, please keep them off the ground, in a dry area, away from the elements.

Sustainability & Quality

Are your insulation products environmentally friendly?

This depends on the individual products, data sheets are available,
and any environmental benefits are noted on the product pages.

Do your products help reduce energy bills?

The correct insulation properly installed can reduce heat loss from a building and therefore help reduce energy costs.

Are your products made in the UK or imported?

With such a wide variety of products some are made in the UK and some are imported.

 

Customer Service & Support

How can I contact your support team?

By phone on 03003 034 578, email sales@insulationuk.co.uk or via our
webchat online

What are your opening hours?

Monday to Friday 8am to 5pm for sales and technical support, orders can be placed on line 24/7

How quickly can I expect a reply to my enquiry?

We aim to respond to our customers as quickly as possible.

Technical Details

Product Details
Brand:
Knauf
Material:
Mineral wool
Manufacturers Part Number:
00715820
Dimensions & Coverage
Length:
6000 mm
Width:
1140 mm
Thickness:
200 mm
Sqm Per Pack:
6.84 m²
Application & Installation
Applications:
Loft
Thermal Performance

Thermal performance helps show how effectively the product reduces heat transfer.

Thermal conductivity measures how readily heat passes through the material, so lower figures generally indicate better insulating performance.

R Value shows the material’s thermal resistance at that thickness, so higher figures generally mean stronger insulation performance.

These figures relate to the insulation product itself and should be considered alongside the full wall, roof or floor build-up when checking project requirements.

Thermal Conductivity:
0.044 W/mK
R Value:
4.50 M²K/W
Fire Performance

Euroclass reaction to fire is the European EN 13501-1 classification used to show how a construction product behaves when exposed to fire.

The main scale runs from A1 and A2 at the highest end, through B, C, D and E, down to F.

A1 is non-combustible and A2 is limited combustibility, while lower classes indicate a greater contribution to fire.

Euroclass F is the lowest rating on this scale and indicates the weakest reaction-to-fire performance.

This is different from fire resistance, which relates to how long a complete wall, floor or roof build-up can resist fire.

Reaction to Fire:
Euroclass A1