Cellecta YELOfon HD10+ System
FREE delivery over £500 excluding VAT
Cellecta YELOfon HD10+ System
FREE delivery over £500 excluding VAT
Couldn't load pickup availability
Product Description
Product Description
Cellecta YELOfon HD10+ System is a complete acoustic resilient layer package designed to isolate a floating screed from a structural concrete floor. Built from closed cell polyethylene foam, it's laid beneath sand and cement or free-flowing proprietary screeds wherever impact and airborne noise transmission between floors needs controlling, from separating floors in apartment blocks to offices, hotels and hospitals.
Supplied as a full kit:
- 1.5m x 33.33m roll of YELOfon HD10+ (10mm thick, covering 50m²)
- YELOfon E-Strip perimeter edging (7mm x 200mm x 33.33m)
- 2x YELOfon J-Strip acoustic jointing tape (2.5mm x 75mm x 40m)
All three components share a thermal conductivity of 0.045 W/mK and long term water absorption of under 5% after 28 days, and the complete system pack weighs 20.5kg, a strong balance of acoustic performance and practical handling on site.
At the heart of the system is that closed cell polyethylene construction, which Cellecta positions as the UK's No.1 high performance under screed resilient layer, with over 10,000,000m² installed across UK floors to date. That scale of use sits alongside compliance with three proprietary Robust Details: E-FC-5 and E-FC-17 for separating floors on a pre-cast concrete plank, and E-FC-18-A for separating floors on an in-situ concrete slab. The Robust Details scheme itself exists as an alternative to pre-completion testing for satisfying Part E of the Building Regulations, so specifying a Robust Detail-compliant system gives a recognised route to demonstrating acoustic performance.
YELOfon HD10+ System is installed by fitting YELOfon E-Strip around the room perimeter first, with the bottom 60mm flange sitting on the floor, then rolling out YELOfon HD10+ over the flange with a minimum 40mm overlap and sealing every joint with YELOfon J-Strip, in line with Cellecta's installation guidance. Where two rolls of HD10+ meet, a minimum 150mm overlap is required. It suits both sand and cement and free-flowing proprietary screeds, and can be used in conjunction with underfloor heating systems when installed per the manufacturer's method. Suitable for residential and commercial projects, new build and refurbishment alike, it gives specifiers and contractors a proven, repeatable way to isolate a floating screed and keep noise complaints off the snagging list.
Key Benefits of Cellecta YELOfon HD10+ System:
- Complete acoustic resilient layer system: 1 x YELOfon HD10+ roll, 1 x YELOfon E-Strip and 2 x YELOfon J-Strip supplied together as standard, so nothing extra needs sourcing.
- Positioned by Cellecta as the UK's No.1 high performance under screed resilient layer, with over 10,000,000m² successfully installed.
- Compliant with three proprietary Robust Details: E-FC-5, E-FC-17 and E-FC-18-A.
- Closed cell polyethylene construction across all three components, each with a thermal conductivity of 0.045 W/mK.
- 10mm resilient layer roll covering 50m² per system, supplied at 1.5m x 33.33m.
- YELOfon E-Strip perimeter edging (7mm x 200mm x 33.33m) and YELOfon J-Strip jointing tape (2.5mm x 75mm x 40m) included for a complete perimeter and joint seal.
- Long term water absorption below 5% after 28 days across the resilient layer, edge strip and jointing tape.
- Lightweight and straightforward to cut, handle and install: complete system pack weighs 20.5kg.
- Suitable for use under sand and cement screeds and free-flowing proprietary screeds.
- Compatible with underfloor heating systems when installed to Cellecta's guidance.
Good to know:
- Install order matters: fit YELOfon E-Strip around the room perimeter first, with the bottom 60mm flange sitting on the floor, before rolling out YELOfon HD10+ over it.
- Overlaps aren't optional: allow a minimum 40mm overlap where HD10+ meets the E-Strip flange, and a minimum 150mm overlap where two HD10+ rolls join, with every joint sealed using J-Strip.
- All three components must go in together: Robust Detail compliance (E-FC-5, E-FC-17, E-FC-18-A) only applies when the HD10+ roll, E-Strip and J-Strip are all installed as a complete system, not the resilient layer alone.
- For free-flowing proprietary screeds, HD10+ can be tightly butt-jointed and taped with J-Strip, though Cellecta advises covering it with a minimum 500-gauge polythene sheet, taping all joints and lapping 150mm around the perimeter.
- Where used with underfloor heating, take care that UFH clips do not penetrate the HD10+ layer.
- Store inside on a pallet in water-tight, dry, flat and level conditions, and don't double stack.
For anyone specifying or installing a floating screed where noise control genuinely matters, YELOfon HD10+ System takes the guesswork out of getting there: everything needed is in the pack, the performance is proven at scale, and the result is a quieter, more comfortable floor built on a system contractors already trust.
Certifications & Standards
Certifications & Standards
Technical Datasheets
Technical Datasheets
- Cellecta YELOfon SDS
- Cellecta YELOfon Installation Guide
- Cellecta YELOfon Technical
- Cellecta YELOfon Application Robust Detail E-FC-5
- Cellecta YELOfon Robust Detail E-FC-5 CAD
- Cellecta YELOfon Robust Detail E-FC-17 Application
- Cellecta YELOfon Robust Detail E-FC-17 CAD
- Cellecta YELOfon Robust Detail E-FC-18 Application
- Cellecta YELOfon Robust Detail E-FC-18 - A CAD
Customer Information
Customer Information
Free delivery on orders over £500 ex-VAT. All orders below £500 (ex-VAT) are subject to a £50 delivery charge.
Ordering & Delivery
How do I place an order with Insulation UK?
You can place an order for delivery anytime online. If you want to collect from our distribution centre in South Yorkshire then please email us your requirements at sales@insulationuk.co.uk
and we will send a payment link and collection instructions. If you can’t see what you are looking for or need more information, then call our team on 03003 034 578 and we can sort your order from there.
How do I know what’s happening with my order and when I will receive it?
When you have placed your order, you will then receive an email confirmation, giving you an order reference number and asking you to double check everything is correct on your order such as delivery address, quantities etc. If there are any amendments to be made, then please reply to your confirmation email with any details.
Once the team has processed the order you will receive an email with a BY delivery date, this is the latest date you will receive your delivery.
Your final email will be a 24/48hr notification, on the day of the delivery if you need a more accurate ETA then contact the office on 03003 034 578.
Do you offer next-day delivery?
Yes, we do on certain lines, you will see our next day delivery products marked as NEXT DAY. Order before 12pm for next day delivery (charges will apply)
How much does delivery cost and how long will it take?
Standard delivery is £50 + VAT for all orders below £500 excluding VAT, above £500 excluding VAT delivery is free. Bespoke deliveries can be made but will incur charges. Each product page gives you an estimate delivery by date. For more accurate information call the team on 03003 034 578
Can I choose a specific delivery date or time slot?
We will endeavour to try and accommodate a preferred date, if you need a delivery on a certain day, then please call us on 03003 034 578.
Do you deliver nationwide?
We deliver across most of the UK; however, some postcodes are restricted due to their location. Check out our delivery map for more information. If you find that you are in area we don’t deliver to, we have access to a wide range of haulage options, please call the team on 03003 034 578 to discuss your requirements further.
Will the driver help unload the insulation products?
Most of our deliveries are made with vehicles with mechanical off-load (known as a moffett or fork-lift), the driver will leave them in a safe place of your choice. They will help as much as they are allowed but are not insured to bring anything into a property.
What happens if my order arrives damaged or incomplete?
In the unlikely event your order arrives damaged, then please contact within 48 hours at sales@insulationuk.co.uk with any images of the damage and the team will be in touch. If there is anything missing, then notify the team within 48 hours on 03003 034 578
What if my order doesn’t arrive and I have paid for trades to be on site, can I claim anything towards the costs I have incurred?
We advise not to have trades booked in and around the day of your delivery. Things can happen beyond our control, and your delivery may be delayed or abandoned. We cannot be held liable for any consequential loss such as tradesman wages etc.
Product Advice & Support
How do I know which insulation product is right for my project?
With such a variety of insulation products, we fully understand making sure you have the right one can seem daunting. Our team have over 50 years of experience in the construction industry and there isn’t a question they haven’t been asked! Speak to our technical team on 03003 034 578 and they will be happy to offer some help and guidance.
Do you offer technical advice or support before I buy?
Yes we do! Just call 03003 034 578 and ask for our technical team and we will be happy to support you.
Product Information & Suitability
Product descriptions on this website are provided as general guidance only and are not a substitute for the manufacturer’s Technical Data Sheet (TDS), fire classification information, and the project’s design/specification requirements. Suitability depends on the full build-up and intended use (including any requirement for encapsulation, coverings, and compliance with Building Regulations and the project fire strategy).
It is the customer’s responsibility to confirm, before ordering, that the product specification and performance are suitable for the intended application by reviewing the relevant TDS and taking professional advice where required. If you are unsure, contact us before purchase and provide your intended build-up so we can confirm what information we can support.
Nothing in this notice limits or excludes your statutory rights
Can I speak to someone to confirm product specifications?
Of course you can! There is also a range of data sheets and guides available on the product pages under Technical Information.
Are your products suitable for both DIY and trade customers?
Yes, they are. If you are new to DIY projects involving insulation,
then we advise to always do your research. We have a handy guides section which may help.
Do you offer fire-rated or eco-friendly insulation options?
Yes, we do. Fire ratings are indicated in the specification table on the product page, and our sustainable range is continually growing.
Pricing & Payments
Do you offer trade or bulk-buy discounts?
We always aim to offer the best price online; however we do offer project pricing for larger orders, speak to our sales team with your requirements on 03003 034 578.
What payment methods do you accept?
We accept all major cards including American Express, as well as Apple Pay, Google Pay and PayPal
Can I set up a trade account with credit terms?
We do offer trade accounts, however there are certain criteria we ask for, and any credit account application is subject to credit checks. Call the team on 03003 034 578 to discuss any credit applications.
Do your prices include VAT?
The website has a toggle at the top right of the page so the prices can be displayed including and excluding VAT. VAT, where applicable, is charged at checkout.
Returns & Cancellations
Can I return unwanted insulation products?
Contact the team via email sales@insulationuk.co.uk with the items you wish to return and any other information. Please note if we you need us to collect any unwanted items,
a collection fee will apply.
How do I arrange a return or exchange?
Contact the team via email sales@insulationuk.co.uk or check out our refund policy.
Are there any restocking fees?
Restocking charges will apply in certain instances, please contact the team via email at sales@insulationuk.co.uk check out our refund policy.
What if I’ve ordered incorrectly or need to cancel my order?
Contact the team via email as soon as possible. The best way to get in contact is to reply to any of the emails we have sent you, they will come straight through to the team and will have any relevant order information already on there.
Installation & Compliance
Do you offer installation services or just supply materials?
We do not offer any installation services; we are a supplier of insulation and building materials.
Can I get a datasheet or certificate of performance for your products?
Yes, data sheets can be found in the Technical Information drop down on the product page.
How should I store insulation products before installation?
There are a variety of insulation products each with their own storage instructions. Generally, please keep them off the ground, in a dry area, away from the elements.
Sustainability & Quality
Are your insulation products environmentally friendly?
This depends on the individual products, data sheets are available,
and any environmental benefits are noted on the product pages.
Do your products help reduce energy bills?
The correct insulation properly installed can reduce heat loss from a building and therefore help reduce energy costs.
Are your products made in the UK or imported?
With such a wide variety of products some are made in the UK and some are imported.
Customer Service & Support
How can I contact your support team?
By phone on 03003 034 578, email sales@insulationuk.co.uk or via our
webchat online
What are your opening hours?
Monday to Friday 8am to 5pm for sales and technical support, orders can be placed on line 24/7
How quickly can I expect a reply to my enquiry?
We aim to respond to our customers as quickly as possible.
Technical Details
- Brand:
- Cellecta
- Size:
- 1.5m x 33.33m
- Length:
- 33.33 m
- Width:
- 1.5 m
- Thickness:
- 10 mm
- Unit Coverage:
- 50 m²
Thermal performance helps show how effectively the product reduces heat transfer.
Thermal conductivity measures how readily heat passes through the material, so lower figures generally indicate better insulating performance.
R Value shows the material’s thermal resistance at that thickness, so higher figures generally mean stronger insulation performance.
These figures relate to the insulation product itself and should be considered alongside the full wall, roof or floor build-up when checking project requirements.
- Thermal Conductivity:
- 0.045 W/mK
