Plasterboard Screws

Plasterboard screws, also known as drywall screws, are essential components for securely fixing plasterboard to timber studwork and metal stud partitions. Choosing the right screw for the job depends on your substrate and application — using the wrong type can result in poor holding strength, stripped threads or damage to the board face. At Insulation UK we stock a comprehensive range to cover every standard drylining application, from single board domestic installations through to multi-layer commercial partitions.

Coarse Thread Drywall Screws

Coarse thread drywall screws are designed for fixing plasterboard to timber studwork and joists. The deep, wide thread profile bites firmly into timber for a strong, reliable hold, and the black phosphate coating provides corrosion resistance in typical site conditions. Available in sizes from 25mm to 100mm to suit different board thicknesses and timber depths.

Fine Thread Zinc Drywall Screws

Fine thread drywall screws are specifically designed for fixing plasterboard to metal stud partitions up to 1.2mm thick. The twin fine thread engages securely with light gauge steel without stripping, and the electroplated zinc coating offers clean, corrosion-resistant performance. Available in sizes from 25mm to 100mm to suit a wide range of metal stud applications.

Collated Drywall Screws

Collated drywall screws are designed for use with auto-feed screwdrivers, making them the preferred choice for high volume installations where speed and consistency matter. Available in coarse thread, zinc and self drill versions to suit timber, metal stud and heavier gauge metal applications. An essential for any contractor working on large partition or ceiling projects.

Self Drill Drywall Screws

Self drill drywall screws feature an integrated drill point that cuts through metal without the need for pre-drilling, making them ideal for fixing plasterboard and other boards to heavier gauge metal sections. They are faster to install than standard fine thread screws in thicker steel and reduce the risk of the substrate deforming under pressure. Available in a range of sizes to suit different steel thicknesses and board combinations.

Wafer & Pan Head Drywall Screws

Wafer and pan head drywall screws are designed for metal-to-metal fixing within partitioning systems, most commonly securing stud to track in steel frame construction. The broad, low profile head provides a large bearing surface that distributes load evenly and clamps thin metal sections securely without deformation. Their low profile also means they sit neatly beneath subsequent layers of plasterboard without creating a bump in the board face.