Pay in 3 prices shown are an example only. Total calculated at checkout.
Delivery within 5 - 7 working days
Free Delivery On Orders
Over £599.95 Ex-Vat
Need something quicker?
Contact us on 0300 303 4578
or email here!
Twice recycled PET mat laminated to P5 PEFC & FSC T&G Chipboard.
Boards are manufactured from PEFC & FSC certified chipboard with a heat-treated green top surface finish bonded to a 100% twice recycled 10mm PET mat.
Sheets are supplied in a 2400mm x 600mm board, either 28mm or 32mm thick (including the mat) for the acoustic treatment of concrete and timber floors when used in conjunction with a recognised acoustic ceiling treatment. The system can be installed over an existing timber or concrete subfloor, or onto timber joists with the addition of our acoustic joist isolation strips.
It should be noted that the 28mm board direct to joists application can only be fitted at a maximum of 400mm joist centres with joist strips. For joists built at 600mm centres the 32mm thick board should be used also with self-adhesive joist strips.
It is the customers responsibility to ensure that the subfloor or joists can provide the support required. Noggins/additional support must be fitted when required. No boards should be installed with unsupported ends.
Boards are installed as a floating floor system with the requirement of our acoustic perimeter strip to ensure isolation of the boards from the superstructure and skirting boards.
KEY FEATURES
-
Low profile acoustic solution
-
Twice recycled PET Mat
-
14 recycled bottles used for every board
-
PET mat considered hypoallergenic
-
Extremely low VOCs
-
PEFC & FSC chipboard
-
P5 moisture resistant
-
Hard wearing surface
-
Suitable for carpets with underlay
-
Suitable for LVT & vinyls
-
Can be tiled over in conjunction with a decoupling mat
PERFORMANCE
Tekfon Acustop Chipboard 28 & 32 require that all components are utilised as specified. The ceiling treatment below the subfloor or joists is also vital for the performance of the system.
The Tekfon components are as follows:
-
Tekfon Acustop Chipboard 28 or 32mm
-
Tekfon Perimeter Strip
-
Tekfon Self-Adhesive Joist Strip
-
Tekfon Water Resistant 2 in 1 Adhesive
-
Tekfon Acoustic and Intumescent Mastic
The ceiling treatment requires the use of 2 layers of 15mm Acoustic plasterboard fitted onto resilient bars* at 400mm centres. Additionally, a 100mm 60kgm3 slab should be fitted between the joists , or into the ceiling void below the subfloor to complete the treatment. All edges to be sealed with acoustic sealant.
Data Sheet
Click here for Data Sheet
| Order Value | Delivery Charge |
|---|---|
| Up to £200.00 ex-vat | £100.00 ex-vat |
| £200.00 - £599.95 ex-vat | £59.95 ex-vat |
| Above £599.95 ex-vat | Free Delivery |
| Weekend Delivery |
|---|
| Available upon request |
| Parcel Rates |
|---|
| Delivery charge may vary depending on quantity and volume of your order. |
| Pricing will be calculated during checkout. |
| Local Delivery Charge |
|---|
| Within 35 miles of Postcode S63 9BL - Up to £500.00 ex-vat |
| Delivery Charge £35.00 ex-vat |
| Collections |
|---|
| Please contact us to arrange collections Tel: 0300 303 4578 | Email: sales@insulationuk.co.uk |
Orders are only processed for delivery between 8.00am - 5.00pm Monday to Friday excluding bank holidays.
Moffett offload will be used for large bulky deliveries and only when agreed with you.
Please advise of any access issues on ordering.
Delivery is Kerbside only.
In the unlikely event that your delivery is not correct or damaged please notify us immediately and mark any issues on the delivery slip.
Where We Deliver
Product Delivery Times
The vast majority of our orders are dispatched within 3 working days, this can however be up to 5 working days, please contact us if you require something urgent.Speciality items may take up to 5-7 working days.
We will contact you with in 24/48hrs of your order been placed to confirm delivery times and dates.
Enter the width(m) and length(m) of your project below:
You may also like...
- Opens in a new window.