Jablite Jabfloor Floor Insulation EPS70 - 2400 x 1200mm

Jabfloor EPS70 is a closed cell expanded polystyrene (EPS) insulation board suitable for use in all floor constructions. It is an excellent insulating medium which exhibits consistent thermal performance over the range of temperatures normally encountered in buildings.

The material is versatile, light in weight, clean and easy to handle, and provides a cost-effective means of including permanent insulation in floors, walls and roofs to meet, and exceed, the standards laid down in the Building Regulations.

Thermal conductivity: 0.038 W/mK.

Certification: BBA certified.

Compressive strength 70kPa (@ 10% compression)

Jabfloor is a BBA-certified floor insulation that achieves the required U-value and compressive performance on a range of different floor applications:

Below ground supported slab
Above slab below chipboard
Above slab below screed
Precast suspended concrete
Cold Store
BBA accredited, certificate 87/1796.
Provides cost effective insulation for the lifetime of the building
Excellent compression properties
100% recyclable
Achieves an A+ rating in the BRE Green Guide to Specification
Available with Class E fire retardant additive
Flood proof
Lightweight and easy to handle
Is non-toxic and biologically inert

A range of compressive strengths are available to suit all building types from domestic to industrial.

Jabfloor should be tightly butted against the perimeter walls and insulation strip should be used on all exposed edges. An expansion gap may be necessary around the edge of the floor finish in screed or particleboard overlay.

Jabfloor is manufactured from expanded polystyrene (EPS) which is lightweight and easy to handle on site.

Jabfloor can be used in temperatures up to 80°C. It is therefore suitable for use with underfloor heating systems

Approved by BBA as Jablite Floor Insulation - Certificate number 87/1796

The Jablite Jabfloor insulation range is available in Grade EPS70, EPS100, EPS150, EPS200 and EPS250 grades as defined by BS EN13163.

As a quick reference, the following guidance about use and design loads applies:

Jablite Jabfloor EPS70 is used for standard domestic loads

Jablite Jabfloor EPS100 is used in offices and schools.

Jablite Jabfloor EPS150 – 250 is used in heavy commercial, industrial settings

COMPRESSION PERFORMANCE

Grade (EPS)	70	100	150	200	250
Nominal Density (Kg/m3)	15	20	25	31	34
Compressive Strength 1% (kN/m2)	20	45	70	90	100
Compressive Strength 10% (kN/m2)	70	100	150	200	250
Shear Strength (kN/m2)	55	75	100	200	250
Shear Modulus (kN/m2)	2100	2800	3400	4100	4800

Accreditation Certificates - Click Here

Product Technical Data PDF - Click Here

Jablite Jabfloor 70 Expanded Polystyrene Insulation (EPS70) | 2400mm x 1200mm