{"product_id":"thermal-economics-isoedge-perimeter-strip-2-6m-x-50m-per-roll","title":"Thermal Economics Isoedge Perimeter Strip 260mm x 50m","description":"\u003cp dir=\"ltr\"\u003eThermal Economics IsoEdge Perimeter Strip (IsoEdge 6\/260) is a pink, self-adhesive acoustic foam strip designed to isolate a floating or acoustic screed from the surrounding structure. It's fitted around the perimeter of a room, at walls, plaster or plasterboard, skirting boards and any penetrations, to stop sound bypassing the resilient layer and travelling through the structure instead, a problem known as flanking sound.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSupplied in a 260mm x 50m roll at 6mm thick, IsoEdge is made from low density polyethylene foam with a self-adhesive backing strip to one face. It has a density of 18 to 30kg\/m³ and carries a Flammability Rating of B2 to DIN 4102. The strip is die-cut 100mm from the bottom edge and overprinted on the front face, so installers can see exactly where to fit it without guesswork.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIsoEdge 6\/260 is designed for use in Thermal Economics' Isorubber Base\/Code and Isorubber HP3 under-screed systems, working alongside the resilient layer rather than replacing it. Used together, this combination features in all of Thermal Economics' under-screed Part E compliant solutions, and IsoEdge 6\/260 specifically is a named requirement of Robust Details E-FC-4, E-FC-12, E-FC-14 and E-FC-18, four of the constructions most commonly specified for separating floors between flats and apartments.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eInstall IsoEdge around the full perimeter of the room before the resilient layer and screed go down, taking it around returns and corners so the isolation stays continuous, and tape every joint, front and back, to keep the seal intact. It isolates the screed from walls, plaster or plasterboard, skirting boards and any pipe or service penetrations, closing off the routes flanking sound would otherwise use to bypass the acoustic floor build-up. It's also suitable for use in non-Robust Detail applications, wherever a perimeter isolation strip is needed for a floating or acoustic screed.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eKey Benefits of Thermal Economics IsoEdge Perimeter Strip:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003ePurpose-made perimeter isolation strip for isolating an acoustic screed from walls, plaster\/plasterboard, skirting and penetrations.\u003c\/li\u003e\n\u003cli\u003eA named requirement of four Robust Details: E-FC-4, E-FC-12, E-FC-14 and E-FC-18.\u003c\/li\u003e\n\u003cli\u003eDesigned for use with Thermal Economics' Isorubber Base\/Code and Isorubber HP3 under-screed resilient layer systems.\u003c\/li\u003e\n\u003cli\u003e260mm x 50m roll, 6mm thick, with a self-adhesive backing strip for quick fitting.\u003c\/li\u003e\n\u003cli\u003eDie-cut 100mm from the bottom edge and overprinted on the front face to guide installation.\u003c\/li\u003e\n\u003cli\u003eLow density polyethylene foam construction, density 18-30kg\/m³.\u003c\/li\u003e\n\u003cli\u003eFlammability Rating B2 to DIN 4102.\u003c\/li\u003e\n\u003cli\u003eZero Ozone Depletion Potential and Global Warming Potential below 5.\u003c\/li\u003e\n\u003cli\u003eAlso suitable for non-Robust Detail acoustic screed applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eGood to know:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit it before the resilient layer:\u003c\/strong\u003e IsoEdge goes in around the perimeter of the room first, isolating the screed from walls and skirting before the Isorubber resilient layer and screed are installed on top.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTake it around returns:\u003c\/strong\u003e carry the strip around corners and returns so the isolation line stays continuous, and tape every joint, front and back, to avoid a break in the seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt works with a resilient layer, not instead of one:\u003c\/strong\u003e IsoEdge 6\/260 isolates the perimeter; it's designed to be used alongside Isorubber Base\/Code or Isorubber HP3 under the screed, not as a standalone resilient layer.\u003c\/li\u003e\n\u003cli\u003ePink in colour with a self-adhesive backing strip; melting point 90°C.\u003c\/li\u003e\n\u003cli\u003eNot biodegradable, but recyclable through a registered recycler.\u003c\/li\u003e\n\u003cli\u003eAlways refer to the latest Thermal Economics installation guidance and current Building Regulations for your specific project.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eFlanking sound is one of the most common reasons acoustic floor tests fail on site, and it's usually down to a missing or poorly installed perimeter detail rather than the resilient layer itself. IsoEdge Perimeter Strip closes that gap: simple to fit, proven across four Robust Details, and built to work as part of a complete under-screed system rather than a bolt-on afterthought.\u003c\/p\u003e","brand":"Thermal Economics","offers":[{"title":"Default Title","offer_id":60643417194830,"sku":"BM000715","price":57.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0894\/1083\/0670\/files\/thermal-economics-thermal-economics-isoedge-perimeter-strip-2-6m-x-50m-tape-1256921131.png?v=1788434354","url":"https:\/\/www.insulationuk.co.uk\/products\/thermal-economics-isoedge-perimeter-strip-2-6m-x-50m-per-roll","provider":"Insulation UK","version":"1.0","type":"link"}