Fermacell® Floor Glue Greenline | 1kg Bottle

FermacellSKU: IUK01535
No reviews

Sale price£30.54 

inc VAT

Pay in 3 prices shown are an example only. Total calculated at checkout.

Delivery within 1 - 3 working days

Free Delivery On Orders
Over £499.95 Ex-Vat

Need something quicker?

Contact us on 0300 303 4578
or email here!

The fermacell® greenline Floor Glue is a label-free, non-foaming, dispersion based, single-component adhesive, which hardens through the evaporation of water viscoplastic.

Easy to apply - the special twin nozzles ensure that the correct amount of glue and placement on the joint edge.
As an alternative to fermacell® Floor Glue, greenline Flue Glue may be used.

Shake fermacell® greenline Floor Glue before use.

The rebated edges of the fermacell® Flooring Elements are glued with fermacell® greenline Floor Glue.

Two glue strings (diameter approx. 5mm) are applied to the edges for this purpose.

This takes place in a single step due to the special twin nozzles.

The next element should be fitted and glued in the perimeter area within 10 minutes, so that the glue fully fills and oozes out of the joint.

This serves to ensure the complete wetting/penetration of the glue to the butt-joints.

In order to ensure the necessary contact pressure, one's own body weight is applied to the upper fermacell® Flooring Element and it is then screwed with fermacell® screws or stapled to the lower element with special diverging staples.

The maximum adhesive joint width is 2mm.

After approx. 5-30 minutes, the excess glue should be removed with a fermacell® glue scraper, a spatula or a chisel.

The surface should then not be walked-on for the next 24 hours.

Hardened glue (>24 hours dry) can be removed with a fermacell® glue scraper or chisel.

The laid surface can be walked-on after approx. 24 hours at a normal indoor climate of 20°C and 50% humidity.

After approx. 72 hours, the full load-bearing capacity is achieved

Remove excess glue after 5-30 minutes with a scraper.

Do not walk on the surface for 24hrs.

Leave to cure for this time at an ambient indoor climate of 20°C and 50% RH.

Remove any hardened glue.

After 73 hours the full load bearing capacity of the flooring element joints are achieved.

Order Value Delivery Charge
Up to £200.00 ex-vat £75.00 ex-vat
£200.00 - £499.95 ex-vat £55.00 ex-vat
Above £499.95 ex-vat Free Delivery


Weekend Delivery
Available upon request


Parcel Rates
Delivery charge may vary depending on quantity and volume of your order.
Pricing will be calculated during checkout.


Local Delivery Charge
Within 35 miles of Postcode S63 9BL - Up to £500.00 ex-vat
Delivery Charge £35.00 ex-vat
Please contact us to arrange collections
Tel: 0300 303 4578 | Email:


Delivery charges will automatically be calculated within the checkout process.
Orders are only processed for delivery between 8.00am - 5.00pm Monday to Friday excluding bank holidays.
Moffett offload will be used for large bulky deliveries and only when agreed with you.
Please advise of any access issues on ordering.
Delivery is Kerbside only.
In the unlikely event that your delivery is not correct or damaged please notify us immediately and mark any issues on the delivery slip.


    Where We Deliver

    Delivery Areas

    We have a fleet of FORS delivery vehicles all with Moffett mechanical off loads that deliver nationwide. Sometimes we may use 3rd party carriers for smaller orders.


      Product Delivery Times

      The vast majority of our orders are dispatched within 3 working days, this can however be up to 5 working days, please contact us if you require something urgent.
      Speciality items may take up to 5-7 working days.
      We will contact you with in 24/48hrs of your order been placed to confirm delivery times and dates.

        Enter the width(m) and length(m) of your project below:

        You may also like...