{"product_id":"100mm-ode-starflex-acoustic-partition-roll-hp-6-5m-x-1-2m-7-80m-per-roll","title":"100mm ODE STARflex Acoustic Partition Roll HP 6.5m x 1.2m - 7.80m2 per roll","description":"\u003cp dir=\"ltr\"\u003eAt 130mm finished wall thickness, a partition built with 100mm ODE STARflex Acoustic Partition Roll HP is the best-performing build-up ODE publishes for this range: a 100mm profile, 100mm of STARflex APR and 15mm plasterboard on both faces, quoted at 45.1dB. That is the case for going to the full depth rather than stopping at 75mm.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe roll is a glass mineral wool product from ODE, the Turkish insulation manufacturer established in 1985, built for acoustic partition applications rather than general thermal use. Each roll measures 1200mm x 6.5m, giving 7.80m² of coverage per roll at a density of 12 kg\/m³, and like the rest of the range it is supplied pre-cut into two 600mm widths for a friction-fit between standard stud centres. It carries a sound absorption coefficient of 0.8 to 1.0 and a Euroclass A1 non-combustible reaction to fire classification to BS EN 13501-1, the highest fire rating available.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAt 12 kg\/m³ this is the lightest section in the range, which keeps a 100mm roll workable overhead in a floor void or on a tall partition run despite the thickness. The pre-cut 2 x 600mm width carries through to the thickest roll too, so installers still handle two ready-sized lengths rather than trimming down a single wide roll, and offcut waste stays low even on the shortest roll length in the range.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e100mm ODE STARflex Acoustic Partition Roll HP is intended for use within internal stud partitions and floor voids, wherever reducing sound transmission between rooms, units or floors is the priority. It should be installed in line with ODE's current technical guidance and the relevant project specification. As the thickest option in the STARflex APR HP range, it suits separating walls and floor constructions where the deepest available cavity is being specified for sound control.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eKey Benefits of ODE STARflex Acoustic Partition Roll HP:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eGlass mineral wool acoustic partition roll built specifically for sound control in stud partitions and floors\u003c\/li\u003e\n\u003cli\u003e45.1dB sound absorption value published by ODE for a 130mm wall with 100mm profile and 15mm plasterboard both sides, the highest figure quoted for this range\u003c\/li\u003e\n\u003cli\u003eSound absorption coefficient of 0.8 to 1.0\u003c\/li\u003e\n\u003cli\u003eEuroclass A1 non-combustible reaction to fire to BS EN 13501-1, the highest fire classification available\u003c\/li\u003e\n\u003cli\u003eMade from over 80% recycled glass content\u003c\/li\u003e\n\u003cli\u003eSupplied pre-cut into two 600mm widths for a friction-fit between standard stud centres\u003c\/li\u003e\n\u003cli\u003e1200mm x 6.5m roll size giving 7.80m² coverage per roll at 12 kg\/m³ density\u003c\/li\u003e\n\u003cli\u003eThe thickest option in the STARflex APR HP range, suited to the deepest partition and floor voids\u003c\/li\u003e\n\u003cli\u003eLightest section in the range, staying manageable to handle at full thickness\u003c\/li\u003e\n\u003cli\u003eReduces on-site cutting and offcut waste compared with a single wide roll\u003c\/li\u003e\n\u003cli\u003eSuitable for domestic and light commercial internal partition work\u003c\/li\u003e\n\u003cli\u003eEngineered not to degrade, decompose or become mouldy over time, per ODE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eGood to Know:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop of the range:\u003c\/strong\u003e 100mm is the thickest roll in the STARflex APR HP line, for builds where the deepest available cavity is being used.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe dB figure is build-specific:\u003c\/strong\u003e 45.1dB applies to the 130mm build-up quoted above. A different profile, board thickness or board layup will perform differently, so check against the project's acoustic specification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eWhere a build has the fullest depth to give, 100mm ODE STARflex Acoustic Partition Roll HP is built to make the most of it.\u003c\/p\u003e","brand":"ODE","offers":[{"title":"Default Title","offer_id":60515426337102,"sku":"BM06705","price":24.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0894\/1083\/0670\/files\/ode-100mm-ode-starflex-acoustic-partition-roll-hp-6-5m-x-1-2m-bm06705-mineral-fibre-insulation-1258721194.png?v=1789399060","url":"https:\/\/www.insulationuk.co.uk\/products\/100mm-ode-starflex-acoustic-partition-roll-hp-6-5m-x-1-2m-7-80m-per-roll","provider":"Insulation UK","version":"1.0","type":"link"}